5-Channel Stepper Motor CNC Controller

Stepper Motor Control
StepControl
Zero-2


price

Additional charge to the 4-channel controller: € 199,00

Info

5-channel stepper motor controller for all S-400, S-720 and S-1000, S-1400, T-Series and PlasCUT

Technical data of the Microstep CNC Controller with 4 or 5 Channels:

            • 5-Channel Stepper motor CNC Controller with actual SMD-Technology
            • Main voltage 115 – 240 Volt / 47 – 63 Hz.
            • Motor current 5 x 3,5 Ampere
            • Microstep cnc controller Resolution 1/10-Step / 2000 Steps/Rev.
            • 5 Connections for 5 brushless Motor / Stepper motor
            • Connection with parallel port and Software WIN PCNC Light, Economy or USB with WIN PCNC USB or Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much other stepper driver software.)
            • “Sleep-Function” for controlling current down
            • Oszillation motor-Connection 24 Volt by PWM controllable ( for example: Tangential knife ) or  24 Volt constant for motor Break by ST-plug
            • 2 relais for maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230 Volt, max. 6,0 A / Plug (for example Air compressor, cooling, exhaust, dust extraction).
            • 0 – 10 Volt for connecting a HF converter for an high frequency spindle
            • 12 Status-LEDs for monitoring all important function (Power, Toggle, Move, X, Y, Z, C; Overheat, Emergency stop, Relais: Spindle / Cooling, Short Circuit)
            • Connection possibility of 4 end- or. Reference switches and one Emergency Stop switch
            • Motor connection by D-Sub 9-pin. (C-Axis: 15-pin.)
            • Emergency-Stop Switch
            • Overheating protection
            • Short circuit protection

con_infoUse the 5-channel control to operate an additional axis (rotary axis, tangential axis etc).
The controls are only available in conjunction with a machine!

con_infoBecause almost 90% of the demand for a 5-channel microstep control and subsequent expansion of an additional axis, the production of the 4-channel control won’t be produced any more in the near future!
Here are some more product descriptions of our High-Z machines.