Industry milling motor 1050 watts – SUHNER UAD 30-RF
(inc. 19% sales tax.)
Industry Milling Motor
Suhner UAD 30-RF
Industry milling motor and grinding motor SUHNER UAD 30-RF
CNC-STEP exclusive: Top RPM range from 3.500-30.000 RPM
Introductory offer for new customers purchasing a CNC-STEP machine:
New customers can take advantage of our special introductory offer for the SUHNER UAD 30-RF industry milling motor:
235€ incl. 8mm and 10mm high quality collet (RRP 24,90€) – Saving almost 90,00€.
There are no overheating problems and delay problems with this stable milling motor, due to large-sized double ball bearings in a stable, thick-walled steel motor flange and the generously dimensioned fan.
A clean and vibration-free cutting result is no problem, thanks to the high quality double bearing in the steel motor flange.
The exclusively available SUHNER milling motor from CNC-STEP is ideal for working with Plexiglas, plastic, PVC, wood, metals, it is also extremely quiet (at 9000 rev / min only 72dB) and can be used in hobby rooms or the commercial sector for milling, engraving or grinding without
Product specifications industry milling motor SUHNER UAD 30-RF:
- Powerful industry milling motor with 1050 watts and 740 watts output power
- High torque of 0,32 Nm for operations in e.g. hard wood, steel or brass
- Tachometer regulator electronics for constant performance and rotation speed of the milling motor on load cycles
- Soft start and starting current limiter
- PTC thermal monitoring
- Very high torque even at 3500 RPM.
- Hard-faced motor winding for dust and particle protection
- Steel motor flange with double bearing for high milling forces
- Electronic overload protection prevents overheating of the milling motor
- Shutoff carbon brushes for motor protection
- Suitable to drive flexible shafts
- FastChange: carbon exchange in 5 minutes, thanks the sophisticated motor construction and housing
Technical data / scope of delivery:
- Power input 1050 watts / rated current at 5,0 A with high output power of 740 watts
- Idle speed from 3.500 to 30.000 RPM.
- Collet 8 mm
- Open-end wrench set SW18 and SW22 mm
- Collar-Ø 43 mm
- Maximum tool diameter: 40mm
- Maximum collet diameter: 10mm
- Weight: 2,85 kg
- Super silent, only 72 dB at 9.000 RPM
- Precision Collet 8 mm
- Industry Milling Motor SUHNER UAD 30-RF
- Open-end wrench SW18 and SW22